Portable Single or multi channel controllers/sensors

EX 2000

To measure explosive gas concentration

• Detects all types of explosive gases
• Displays 0-100% LEL
• Can be programmed for a selected gas

EX 2000 C

To measure the concentration of explosive gases

• Only on detection sensor
• Detects and displays low concentration (0-100LEL) and high concentration (0-100 %vol)
• Automatic switch over range (catalytic or catharometric)

GD 2000

To discriminate between natural and other explosive gases

• Detects all types of explosive gases with discrimination
• User friendly display

GDP 2000

To discriminate between natural and other explosive gases and display concentration

• Detects all types of explosive gases with discrimination
• User friendly display

CO2 Pocket Detector

Toxic Gases, Tubes and Pumps

OX/TX 2000 and 2000 Plus

• Compact and light weight
• Gases available: O2 and toxic gases
• 2 instantaneous alarm thresholds
• STEL - TWA alarms
• User friendly
• Plug in sensor
• Reduced cost
• Simultaneous detection of ambient CO and HBCO
• Non rechargeable battery power supply with the Range 2000
• Long running time (>7000 hours with lithium pack) and count down of operation time with the 2000+ Range

Tubes and Pumps

• More than 150 types of tubes available
• Easy to use
• Qualitative and quantitative measurement
• Single pumping mechanism

Portable Multi gas Detectors

MX 2000

• Simultaneous detection of up to 4 gases
• LED or LCD display
• Instantaneous STEL - TWA alarms
• Small dimensions
• Light weight
• Long running time
• Data logging and print out
• Library of 32 preset flammable gases

MX 21 PLUS

• Simultaneous detection of up to 4 gases
• Smart interchangeable pre calibrated sensor
• Data logging
• Library or 32 preset flammable gases
• Instantaneous and STEL - TWA alarms

 BM 22 Plus

• Transportable stand alone area monitoring
• Simultaneous detection of up to 4 gases
• Data logging
• Battery life: 150 hours
• Robust
• User friendly
• Possible network of 4 BM22 Plus

The Impact range of portable multigas monitors is able to monitor and display up to four gases simultaneously. Using high specification flammable, oxygen and patented Surecell™ toxic sensors, our unique cartridge technology ensures safe, accurate
and reliable measurements are always made.

Available in two configurations, the Impact and Impact Pro accepts either disposable and/or serviceable cartridges respectively, all of which are pre-calibrated and can be replaced in under one minute, so simplifying maintenance and minimizing cost wherever possible. Compact and rugged these monitors are designed for tough working environments while being small, lightweight and unobtrusive, making them ideal for use in confined spaces where entry and exit may be difficult.

Designed to work how you want to; gas checks prior to entering a confined space can be carried out using a drop line, hand aspirator or via an optional built-in pump (supplied as standard on the Impact Pro) that turns on and off automatically when the sampling tube is connected.

Ultra-bright alarm lights and a powerful audible alarm, coupled with a periodic green flash and bleep provide user confidence that monitoring is always in operation and alarms are never missed. For noisy environments a vibrating alarm is included as standard on the Impact Pro. A large, multi-lingual, backlit display, with intuitive menu system simplifies use and minimizes operator training.

Available for use with a wide range of accessories including the unique Enforcer calibration system and compliance friendly Safelink communication system, you can be sure that the Impact range of portable multigas monitors will be ready to protect you when most needed.

The MicroMAX PRO is the best microprocessor controlled multi-gas monitor on the market today. It's the only monitor that has it all - easy to use, reliable, highest quality, economical, lightweight, shortest response time, built-in data logging, Lifetime Warranty - and now includes our newest innovation Voice Assist! It's another monitoring feature to safeguard lives while aiding in normal operation.

Since worker safety is our business, Lumidor continually strives to improve its gas detector product line, and has done so with the addition of the voice message feature. Four languages (English, French, German and Spanish) are included with each monitor - just select the desired language. Every function, when activated, is accompanied with a voice message. Everything from immediate warnings to simple on and off functions are communicated verbally to the user. This feature is also very valuable in poorly lit situations. The language displayed on the new 4-line display is the same as the one selected for the voice.

The MicroMAX Pro is designed to provide the ultimate in personal safety. It's OSHA compliant, and has a rugged case that provides superior RFI/EMI shielding, as well as dust, water and impact resistance. Additionally, it is designed, tested and manufactured under strict ISO 9001 standards, and is UL classified for use in Class I, II, III Division I, Groups A, B, C, D, E, F, G.

Now the MicroMAX PRO combines diffusion and built-in internal sampling pump systems for simultaneously monitoring 1 to 5 gases. The popular internal pump allows for easy pre-testing in confined spaces and provides almost instantaneous readings of gas concentrations. In order to save power, the pump can be switched off and the diffusion mode will take over.

MicroMAX PRO has preset and field selectable alarms. Both audible and visual alarms warn the user if the oxygen levels are either too low or enriched, combustible gas is present or toxic gas levels are too high. The toxic gas alarms can be easily adjusted in the field from immediate to TWA. Alarms are also activated in case of sensor failure, low battery voltage, pump blockage or low air flow.

Our unique microprocessor design allows for self diagnostics with each start up. The MicroMAX PRO internally data logs individual channel alarms, TWA averaging and peak information. With a push of the "Mode" button, review information, as well as customize user settings or initiate calibration. This information is available for display and OSHA documentation for employee awareness programs by downloading to a standard Windows-compatible PC with Lumidor's MPRO-DATALOG software.

Calibration is easier than ever before - it's all automatic - no tools, screws or stopwatch required. Simply place in calibration "Mode", introduce calibration gas and wait for voice/display indicating calibration is complete! A NiMH rechargeable battery pack and 4-hour charger are now included with each monitor. However the flexibility of operating the monitor with alkaline batteries is still retained.

Multi-gas Monitoring Made Easy

MiniMAX4 is an unsurpassed portable gas detector for protection against flammable, oxygen, carbon monoxide and hydrogen sulfide gas hazards. It's ideal for use by those companies wanting advanced performance, reliablity and ease of use without high costs of long term maintenace.

MiniMAX4 focuses on ease of use by offering only the functionality required to comply with legislation.Everything that a user ROUTINELY HAS TO DO can be achieved with a single button press! Keeping it simple reduces training requirements and enables use in a wider range of industries.

Ease of use doesn't mean basic functionality. For example, every instrument has the capability to log data using a simple to fit memory card (the type you get in a digital camera). Events, gas data and the calibration history are all stored and the free software downloaded from our web site enables you to graph
or print reports at the press of a button.

Convenience and the way users want to work is an important consideration. When clipped to the belt or harness users may want the re-assurance of being able to view the display from different positions. But with many other units the display is upside down forcing the user to remove the unit to look at the display, perhaps creating a hazard. With the MiniMAX4 users can 'flip' the display at the press of a button for that added convenience and safety.

With an ultra clear backlit display, vibrating and powerful audiovisual alarms, the MiniMAX4 demands attention when
gas hazards are detected in even the most adverse working conditions. All in all, MiniMAX4 offers reliable, easy to use gas detection to keep you safe.

Test and Calibration Made Easy

Regulations require regular testing of gas monitoring equipment to ensure that the instrument will work as and when required. The Enforcer allows you to easily comply with regulations when using an Impact multigas monitor without the need for costly test facilities or third parties.

‘Bump' testing should be carried out before use of any portable gas detector. This involves exposing each gas sensor to a known concentration of target gas and ensuring that it responds correctly. If not, the unit must be re-calibrated or serviced to replace those parts not working.

Personal gas monitors are normally calibrated every 3 to 6 months. Typically this requires specialist knowledge and equipment that is costly or the work is sub-contracted to a third party. During this time instruments are not available for use and so could delay essential operations or force additional monitors to be purchased.

The Enforcer calibrates Impact multigas monitors fitted with oxygen, flammable, carbon monoxide and hydrogen sulfide sensors in less than two minutes. Volumes and flow rates are minimized to allow approximately 200 calibrations per cylinder
of gas making calibration as low in cost as a ‘Bump' test.
Impact instruments when used with The Enforcer are always available for use. Calibration results are recorded for printing
at a later date via the optional PC software thereby ensuring
that instrument histories are always available if required.

Portable Single Gas Detectors

MiniMAX XT is the result of customer inspired partnerships. The unit is technically crafted to be, quite simply, the easiest and most cost effective to use single gas on the market. Utilizing patented sensing technologies, the MiniMAX XT provides 24/7 user confidence. That means solid, reliable, continuous protection…always.

Lumidor identified that the market demanded more than tiny good looks in a single gas. Our valued partners said that in addition to a small and rugged design, single gas monitors must offer comprehensive sensor options, simple operation and most importantly, reliable, and accurate readings – without false alarms triggered by common radio interference.

Simple one button operation reduces time consuming and costly training issues. Our unique Temperature Compensation and Cell Output Decay Compensation features ensure improved accuracy across wide temperature ranges, providing our 2 year, no calibration needed facility.

eXtra Protection from a single gas detector…XP is making it really personal!

The MiniMAX XP is all about preferences. It delivers advanced, full feature functionality, user configurability with cost effective serviceability for a wide range of toxic gases. The market demands more than small size and good looks in a new generation single gas monitor.

A compact and rugged design, maintenance that's easy while providing simple operation is essential. With loud, ultra-bright audiovisual alarm, XP demands attention when gas is detected. For noisy environments, a built-in vibrating alarm is supplied as standard.

XP delivers all of the above while still ensuring reliable, accurate readings and no false alarms from radio frequency interference (RFI). In addition XP provides continuous gas readings, TWA/STEL and two instantaneous alarms with peak hold facility.

By using # SureCell™ sensors with TempraSURE™ Thermal Shock Correction and Reflex™ Sensor Protection, XP ensures improved accuracy and reliability in adverse operating conditions. Maintenance could not be easier. Built-in Cell Decay Compensation extends the time between calibrations to 12 months. With typical sensor life in excess of two years and three year battery life*, operational costs are minimized. Batteries and sensors can be easily replaced by the user. Alternatively, Lumidor offers a wide range of service programs to meet our customer needs.

MiniMAX Pro has been designed for day-to-day use in industrial environments. While being small and lightweight, its tough design ensures that it can take the everyday knocks during normal use. Instantaneous and time weighted alarms are pre-configured, however, user adjustment is easy using the intuitive menu system. Peak readings are also held for review when required.

MiniMAX Pro is designed to minimize the number of variants used at a single site. Pre-calibrated smart sensors can be swapped between instruments. A single instrument can be used with up to eight different types of sensor. So, while the majority of instruments in use may be Hydrogen Sulfide the same instruments can be used for Chlorine spot checks or specific operations where the gas may be present.

A data-logging version is also available for those applications that demand records to be kept

Multi-gas Monitoring Made Easy

MiniMAX4 is an unsurpassed portable gas detector for protection against flammable, oxygen, carbon monoxide and hydrogen sulfide gas hazards. It's ideal for use by those companies wanting advanced performance, reliablity and ease of use without high costs of long term maintenace.

MiniMAX4 focuses on ease of use by offering only the functionality required to comply with legislation.Everything that a user ROUTINELY HAS TO DO can be achieved with a single button press! Keeping it simple reduces training requirements and enables use in a wider range of industries.

Ease of use doesn't mean basic functionality. For example, every instrument has the capability to log data using a simple to fit memory card (the type you get in a digital camera). Events, gas data and the calibration history are all stored and the free software downloaded from our web site enables you to graph
or print reports at the press of a button.

Convenience and the way users want to work is an important consideration. When clipped to the belt or harness users may want the re-assurance of being able to view the display from different positions. But with many other units the display is upside down forcing the user to remove the unit to look at the display, perhaps creating a hazard. With the MiniMAX4 users can 'flip' the display at the press of a button for that added convenience and safety.

With an ultra clear backlit display, vibrating and powerful audiovisual alarms, the MiniMAX4 demands attention when
gas hazards are detected in even the most adverse working conditions. All in all, MiniMAX4 offers reliable, easy to use gas detection to keep you safe.