UV sterilizers and Filtration Systems

SPV-1.5, SPV-2.5, SPV-3.5, SPV-6, SPV-8, SPV-12, SPV-15, SPV-20

The new Sterilight Platinum "SPV" series carry NSF/ANSI Standard 55, Class A certification. A total of eight systems are available with flow rates from 1.5 to 20 gpm. Whether you are looking for a point-of-use disinfection system or a high-flow point-of-entry system, Sterilight's "SPV" Platinum systems have you covered.

These validated systems carry a 40 mJ/cm2 UV dose at the alarm set-point as dictated by NSF/ANSI Standard 55 test protocol. Systems offer a 4-log reduction (99.99%) in bacteria, virus and protozoan cysts (Giardia lamblia and Cryptosporidium).

The Sterilight process is quick, simple, inexpensive and environmentally friendly as it does not add anything to your water and creates no disinfection by-products. Sterilight is the most ecological way of treating your water.......and all this for just pennies a day!

Applications include private wells, camp grounds, hotels, bottlers, aquaculture, hospitals, food, cottages, restaurants, breweries, water systems, laboratories, marine, pharmaceutical, dairies and many other applications.

System

flow rates of 1.5, 2.5, 3.5, 6, 8, 12, 15, and 20 gpm
high output coated UV lamps
316L stainless steel electropolished axial flow reactors
electronic controller with graphical Smart-SwitchTM interface
2-stage flow pacing with Flow-PaceTM UV sensor
over molded connector with built-in safety interlock switch
NSF/ANSI certified under Standard 55, Class A
316L stainless steel flow restrictors
> 99.99% destruction of bacteria, virus, and protozoan cysts (Giardia lamblia & Cryptosporidium) at rated flow
natures way to protect your water without the addition of harmful chemicals
seven year warranty on reactor chamber for unparalleled protection
product certified by CSA (C US) and to CE standards

Reactor

Axial flow design reactors (CFD modeled)
Flow distributor washer to redirect water close to the lamp upon exiting the chamber
316L electropolished and passivated
Combination ports (3/4" FNPT / 1" MNPT) on 6 - 20 gpm systems
A249/A269 pressure rated tube

Controller

Smart SwitchTM graphic user interface switch
90-265 VAC universal operation
Visual UV intensity readings (reads in % UV output)
Visual elapsed time meter (counts down remaining days between lamp changes and provides total running time of controller)
Constant current output over entire input line voltage
Active power factor correction
EMI/RFI filtering (meets new CE directives)
One controller to drive all lamps
Isolated power source for alarm system
True lamp current detection
Full diagnostic check on start-up
Separate fuse protection for ballast circuit
Dry contacts (for solenoid, lamps, audible alarms, etc.)
RJ-11 communication port
Universal IEC power input connector

Sensor

Discrete 254nm UV sensor provides stable, long-life reliability
Patent pending 2-stage flow pacing (adjusts lamp power in relation to water flow)
Sensor and calibration all in one water tight enclosure
Flush sensor face eliminates air bubbles

Connector

New one-piece molded lamp connector
Power interlock switch built-in to the connector (automatically disconnects power to the lamp when connector is removed)
Allows for quick and easy lamp removal without any special tools
Keyed to reactor chamber for optimum lamp/sensor alignment

HO Lamps

High output UV lamps
Proprietary lamp coating for consistent UV output
Superior cold operation
Ceramic lamp bases
9000 hour life
One-year warranty on all Sterilume HO lamps

click here for a filtration basics power point presentation 11,026kb

click here for a UV basics power point presentation 12,209 kb

click here for a water basics power point presentation 3,704 kb

click here for more information about R-Can NSF certification

home sitemap EAS service links testimonials

Environmental Analytical Systems
286 Mask Island Drive
Barry's Bay, Ontario, Canada K0J 1B0

Phone: 613 756 0101
Toll Free (Canada only): 1 800 427 8591
Fax: 613 756 0909
email: info@enviro-analytical.com